ZERNIQ A3 DTF Printer with Starter Ink
The 13-inch XP600 roll-fed DTF printer bundled with an ink set, film, adhesive powder and cleaning solution. Review the included supplies and the equipment needed for your transfer workflow.
Use the DTF transfer workflow to plan the steps after printing.
What to prepare before buying
Prepare a Windows 10 or 11 x64 computer supported by the installation guide, access to the verified packages, and time to learn the RIP and record test jobs. Plan curing equipment, a heat press and a workspace that follows the equipment and material instructions. A printer does not replace those stages.
Allow for model-specific routine care, replenishment of consumables, and time to stop and contact support when a test fails. No zero-learning setup is promised.
What distinguishes this bundle
The confirmed bundle contains the printer, ink set, film, powder and cleaning solution. Unverified quantities and capacities are omitted; an oven, heat press and computer are not implied. Check the product details and purchase destination before ordering.
This ZERNIQ bundle includes the A3 DTF printer, an ink set, film, adhesive powder and cleaning solution. It is distinct from the standalone printer and the standalone curing oven. Plan the curing and heat-press stages separately for your complete garment-transfer workflow.
A3 printer with ink, film, powder and cleaning solution
Choose the printer-and-supplies bundle when you need the printing platform together with these consumables. Confirm quantities and material-specific instructions before use; they are not specified here.
Printer and consumables included
The bundle contains the A3 printer, an ink set, film, adhesive powder and cleaning solution. Exact quantities and capacities are not specified here.
13-inch XP600 platform
Print on PET roll film up to 330 mm / 13 in wide with an XP600 printhead and listed resolution up to 1440 × 1440 dpi.
White ink circulation and CISS
Automatic white ink circulation and continuous ink supply help keep the ink workflow organized during regular production.
Clear workflow boundary
The package starts the printing stage. Powder application, curing, and heat pressing remain separate steps and equipment decisions.
ZERNIQ A3 Printer + Starter Ink FAQ
How is this bundle different from the printer-only option?
It uses the ZERNIQ A3 printer platform and includes an ink set, film, adhesive powder and cleaning solution. The standalone printer and standalone curing oven are separate product options.
What is the maximum print width?
The printer supports PET roll film up to 330 mm / 13 in wide.
Which printhead and resolution does it use?
It uses an XP600 printhead and lists maximum resolution up to 1440 × 1440 dpi.
Which computers are compatible?
It connects by USB and supports Windows 7, Windows 10, and Windows 11. macOS is not supported.
What else is required to make finished transfers?
The bundle includes ink, film, adhesive powder and cleaning solution with the printer. Plan suitable curing equipment and the heat-press stage for your garment-transfer workflow, following the instructions for the actual materials and equipment.
Can I use any ink or film?
Use DTF ink and PET transfer film compatible with this printer, and follow the consumable supplier's handling and transfer guidance.
What should I check before printing?
Confirm ink flow, load the PET roll correctly, and run a nozzle test before production. Clean only if the test indicates a problem.
What if the printer will be off for more than two days?
Clean the ink tubes and printhead before an extended shutdown. For regular use, keep the printer powered on so it can enter sleep and perform scheduled cleaning.