ZERNIQ XP600 A3 DTF Printer
An XP600 DTF printer for PET roll film up to 330 mm / 13 in wide, with automatic white ink circulation. Pair it with compatible consumables, curing equipment and a heat press for garment transfers.
Follow the complete DTF transfer workflow before preparing your first garment.
What to prepare before buying
Prepare a Windows 10 or 11 x64 computer supported by the installation guide, access to the verified packages, and time to learn the RIP and record test jobs. Plan curing equipment, a heat press and a workspace that follows the equipment and material instructions. A printer does not replace those stages.
Allow for model-specific routine care, replenishment of consumables, and time to stop and contact support when a test fails. No zero-learning setup is promised.
Printer-only versus the bundle
This option is the standalone printer. Compare included items with the bundle containing printer, ink set, film, powder and cleaning solution. The oven is a separate product; buying the printer alone does not establish a complete finishing setup.
The ZERNIQ XP600 A3 DTF printer prints on PET roll film up to 330 mm / 13 in wide using CMYK + white DTF ink. It is the printing stage of a complete transfer workflow; powder application, curing equipment, and a heat press are also required to finish apparel transfers.
Built for a practical roll-fed DTF workflow
Review the print width, Windows USB setup and maintenance requirements before choosing your equipment. If you also need initial ink, compare the starter-ink option; both use the same printing platform.
White ink kept in motion
Automatic white ink circulation helps reduce settling during use and supports more consistent day-to-day printing.
13-inch roll-fed output
The 330 mm / 13 in print width supports PET roll film and continuous DTF production rather than sheet-only loading.
Heating and ink delivery built in
Dual-stage rear heating and a CISS ink supply support a steadier film workflow during longer print runs.
Windows-based USB setup
Connect through USB 2.0 or 3.0 to a computer running Windows 7, 10, or 11. macOS is not supported.
ZERNIQ A3 DTF Printer FAQ
What is the maximum print width?
The maximum print width is 330 mm / 13 in, using roll-fed PET DTF transfer film.
Which printhead and resolution does it use?
The printer uses an XP600 printhead and lists a maximum resolution of 1440 × 1440 dpi.
Which computers are compatible?
It connects by USB and supports Windows 7, Windows 10, and Windows 11. macOS is not supported.
Which ink and media are required?
Use compatible CMYK + white DTF ink and PET DTF transfer film. The printer uses a CISS ink supply with automatic white ink circulation.
Is a heat press included?
No. A complete workflow also requires adhesive powder, suitable curing equipment, and a heat press.
What should I check before printing?
Load the PET film in the marked direction and run a nozzle test. If the result is abnormal, use the printer's cleaning function and recheck the nozzles before production.
Can I leave the printer powered on?
For regular use, keep the printer powered on so it can enter sleep and perform scheduled cleaning. If it will be shut down for more than two days, clean the ink tubes and printhead first.
What routine maintenance is recommended?
Keep the work area clean and ventilated, inspect the scraper and ink pad, and clean the raster strip as needed. Avoid repeated cleaning cycles unless the nozzle check indicates they are necessary.